Spare Parts

Tork Craft Imp. Drill Carbon Brush Pair (43) Service Kit For TCID1100 At a Glance: Replacement carbon brush pair (part 43) for the Tork Craft TCID1100 motor Carbon brushes are the motor’s “sliding contacts” that feed power into the spinning armature. When they wear down, the symptoms show up quickly: weaker power, intermittent running, excessive sparking, and sometimes a tool that won’t start without a bit of persuasion. The Tork Craft TCID1100-SK10 Imp. Drill Carbon Brush Pair service kit..

Tork Craft Repl. Trigger Compl. Kit (47-49) Service Kit For TCID1100 At a Glance: Replacement trigger complete kit (parts 47–49) for the Tork Craft TCID1100 impact drill/driver When a trigger starts misbehaving, the whole tool becomes a gamble—dead spots, inconsistent speed response, random cut-outs, or a trigger that feels sticky and worn. The Tork Craft TCID1100-SK11 Repl. Trigger Compl. kit replaces the trigger components (parts 47–49), restoring dependable control response so your TCID..

Tork Craft Repl. Cable & Sheath (50-53) Service Kit For TCID1100 At a Glance: Replacement cable and protective sheath kit (parts 50–53) for the Tork Craft TCID1100 Cables are the tool’s lifeline—and they’re also the part most likely to get yanked, snagged, crushed, or “repaired” with tape and optimism. If your TCID1100 cable is frayed, cut, loose at the entry point, or the protective sheath is split, you’re dealing with a safety risk and a reliability problem. The Tork Craft TCID1100-SK12 ..

Tork Craft Housing L/R With Screws (54-56) Service Kit For TCID1100 At a Glance: Replacement left and right housing with screws (parts 54–56) for the Tork Craft TCID1100 The housing is your tool’s protective shell and structural backbone. It keeps the motor, gearbox and wiring supported, protects against dust and impacts, and gives you the grip and control you need during high-torque work. If the housing is cracked, stripped at the screw points, or no longer closing properly, the tool can ..

Tork Craft Auxilary Handle Compl. With Rod (57-61) Service Kit For TCID1100 At a Glance: Auxilary handle complete with rod service kit (parts 57–61) for improved control on the Tork Craft TCID1100 When torque ramps up, an impact drill/driver can try to twist itself out of your hands—especially on larger fasteners or heavier drilling. An auxiliary handle gives you the extra leverage and stability needed to stay in control and work more comfortably. If your original handle is missing, cracke..

Tork Craft Control Panel & Motor Switch (34/37/38) Stand Service Kit At a Glance: Replacement control panel and motor switch components (parts 34, 37 and 38) for the Tork Craft TCDM0035PM stand When a stand’s controls start acting up—intermittent switching, inconsistent starts, or a switch that feels “tired” and unpredictable—your entire setup becomes the weak link. The Tork Craft TCDM0035PM-SK22 Control Panel & Motor Switch service kit replaces the key control and switching components (pa..

Tork Craft Repl. Handle (15-17) Stand Service Kit At a Glance: Replacement handle components (parts 15–17) for the Tork Craft TCDM0035PM stand The handle on a drill stand does more than just “move the head up and down” — it’s your control lever for precision, pressure and safety. If the handle is bent, loose, cracked, or missing parts, you lose smooth feed control and accuracy suffers fast. The Tork Craft TCDM0035PM-SK23 Repl. Handle stand service kit replaces the handle components (parts ..

Tork Craft Pinion Shaft & Key (13/14) Stand Service Kit At a Glance: Replacement pinion shaft and key components (parts 13 and 14) for the Tork Craft TCDM0035PM stand If your stand suddenly feels sloppy, skips under load, or the feed action isn’t lifting and lowering smoothly, the pinion shaft area is a prime suspect. The Tork Craft TCDM0035PM-SK24 Pinion Shaft & Key stand service kit replaces the key drive components (parts 13 and 14) that transfer your handle input into controlled moveme..

Tork Craft Bearing & Gear Set (7-12) Stand Service Kit At a Glance: Bearing and gear set service kit (parts 7–12) for smoother, more accurate movement on the Tork Craft TCDM0035PM stand A drill stand should feel like a controlled machine, not a shopping trolley with attitude. If the feed action is rough, noisy, or developing side-play, the bearings and gears in the mechanism are often worn or contaminated. The Tork Craft TCDM0035PM-SK25 Bearing & Gear Set stand service kit replaces the key..

Tork Craft Parameter & Control Panel (35/36/42) Stand Service Kit At a Glance: Replacement parameter and control panel components (parts 35, 36 and 42) for the Tork Craft TCDM0035PM stand When the control panel is damaged, unresponsive, or your stand’s settings stop behaving consistently, the whole setup becomes frustrating (and in some cases, unsafe). The Tork Craft TCDM0035PM-SK26 Parameter & Control Panel stand service kit replaces the panel-related components (parts 35, 36 and 42), hel..

Tork Craft Panel & Gasket (32/33) Stand Service Kit At a Glance: Replacement panel and gasket components (parts 32 and 33) for the Tork Craft TCDM0035PM stand Dust, vibration and workshop life have a way of turning small gaps into big problems. If your stand’s panel is cracked, missing, or the gasket has flattened and stopped sealing properly, you’re inviting dust and debris into places that really don’t want it—especially around controls and wiring. The Tork Craft TCDM0035PM-SK27 Panel & ..